| Model Number | Round Capacity | Blade Size | Controller | Blade Motor |
|---|---|---|---|---|
| HFA250W | 10″ | 1-1/4″ | PLC Automatic | 5 HP |
| HA250W | 10″ | 1-1/4″ | Automatic | 5 HP |
| HFA400W | 16″ | 1-1/2″ | PLC Automatic | 7.5 HP |
| HA400W | 16″ | 1-1/2″ | Automatic | 7.5 HP |
| Model Number | Round Capacity | Blade Size | Controller | Blade Motor |
|---|---|---|---|---|
| HC-260NC | 10.2″ | 1-1/4″ | PLC Automatic | 5 HP |
| C-325NC | 12.8″ | 1-1/4″ | Automatic | 5 HP |
| C-460NC | 18″ | -1/2″ | PLC Automatic | 10 HP |
| Model Number | Round Capacity | Blade Size | Controller | Blade Motor |
|---|---|---|---|---|
| DC-280NC | 11″ | 1-1/4″ | PLC Automatic | 5 HP |
| DC-330NC | 13″ | 1-1/4″ | PLC Automatic | 5 HP |
| DC-420NC | 16.5″ | 1-1/2″ | PLC Automatic | 10 HP |
| DC-460NC | 18″ | 1-1/2″ | PLC Automatic | 10 HP |
| DC-560NC | 22″ | 2.0″ | PLC Automatic | 10 HP |
| Model Number | Round Capacity | Blade Size | Controller | Blade Motor |
|---|---|---|---|---|
| G320 | 12.8″ | 1-1/4″ | PLC Automatic w/Variable Drive | 5 HP |
| C-320NC | 12.6″ | 1-1/4″ | PLC Automatic | 5 HP |
| C-420NC | 16.5″ | 1-1/2″ | PLC Automatic | 10 HP |
| C-520NC | 20.5″ | 2″ | PLC Automatic | 10 HP |
| C-620NC | 24.4″ | 2″ | PLC Automatic | 10 HP |
| C-800NC | 24.4″ | 2″ | PLC Automatic | 15 HP |
Laser metal positioning. Smart Blade change. 27.6″ Feed Stroke. Automatic Wire Brush Adjustment. Double Vibration Dampening Rollers.
| Model Number | Round Capacity | Blade Size | Controller | Blade Motor |
|---|---|---|---|---|
| Dynasaw 430 | 17″ | 1-1/2″ | NC Control w/Program list | 7.5 HP |
| Dynasaw 530 | 21″ | 2″ | NC Control w/Program list | 10 HP |
High Precision Linear Guide Way. Inverter Blade Drive System. Automatic Wire Brush Adjustment. Ball Screw or a Hydraulic System (depending on model).
| Model Number | Round Capacity | Blade Size | Controller | Blade Motor |
|---|---|---|---|---|
| C2 | 10.2″ | 1-1/4″ | NC Control w/Program list | 5 HP |
| C3 | 14.2″ | 1-1/2″ | NC Control w/Program list | 7.5 HP |
| C4 | 18″ | 2″ | NC Control w/Program list | 7.5 HP |
| C5 | 22″ | 2″ | NC Control w/Program list | 10 HP |
Revolutionary Pulse Cutting Bandsaws Achieving higher cutting rates without increasing vibration, sacrificing precision or blade life. Required breakthrough thinking, which is precisely what Amada delivers. By sending controlled pulses to the blade, Amada eliminates unwanted vibrations and delivers some of the highest cutting rates in the industry. The pulses can be applied to the penetration force (single pulse) or to the longitudinal force as well (double pulse). We offer 7 models with this innovative technology to meet your most demanding cutting jobs.
| Pulse Saw Models | Cutting Capacity | Blade Motor | Pulse Control Penetration Force | Cutting System | CNC Control |
|---|---|---|---|---|---|
PCSAW330
 |
13″ | 5HP | Induction MotoR Drive | Hydraulic Pressure andFlow Control | NC Digital Input |
PCSAW430X/AX
 |
17” | 15HP | Induction MotoR Drive | X: Flow Control Valve with Stepping Motor. AX: Servomotor with Ball Screw | yes |
| PCSAW530X/AX
|
21” | 20 HP | Induction MotoR Drive | X: Flow Control Valve with Stepping Motor. AX: Servomotor with Ball Screw | yes |
PCSAW720
 |
28” | 25HP | Induction MotoR Drive | X: Flow Control Valve with Stepping Motor. AX: Servomotor with Ball Screw | yes |
| Model Number | DS-320SA (Semi-Automatic) | S-320CNC (Automatic at 90*) | 400-S (Semi-Automatic) | DS-500SA (Semi-Automatic) | DS-500CNC (Automatic at 90*) | DS-600SA (Semi-Automatic) |
|---|---|---|---|---|---|---|
| Blade Size | 1″ | 1″ | 1″ | 1-1/4″ | 1-1/4″ | 1-1/2″ |
| Blade Drive Motor | 2 – 2.5 HP | 3 HP | 2 HP | 4 HP | 4 HP | 5 HP |
| Rectangle capacity at 60° | 7.75 x 7.75″ | 7.75 x 7.75” | N/A | 10.6 x 12.6″ | 13.75 x 10.2” | 9.5 x 12.5″ |
| Rectangle capacity at 45° | 9.75 x 11.75″ | 11 x 9.75” | 9 x 10.75″ | 7.5 x 15.75″ | 7 x 14” | 9.5 x 18.5″ |
| Round capacity at 60° | 7.75″ | 7.750” (tube) 3.125” (solid) | N/A | 12.2″ | 11.8” (tube) | 12.5″ |
| Round capacity at 45° | 11.75″ | 11.75” (tube) 4.250” (solid) | 10.75″ | 14.2″ | 14.2” (tube) | 18″ |
| Round capacity at 90° | 11.75″ | 11.75” (tube) 7” (solid) | 10.75″ | 14″ | 14” (tube) 9.75” (solid) | 18″ |
| Round capacity at 90° | 11.75 x 12.5″ | 11.75 x 12.5″ | 10 x 16″ | 14 x 20″ | 14 x 20” | 18 x 23-1/2″ |
| Model Number | MH-270M (Manual) | SH-500M (Semi– Automatic) | C-510MNC (Automatic at 90*) | SH-650M (Semi-Automatic) | C-650MNC (Automatic at 90*) | SH-700DM (Semi-Automatic) |
|---|---|---|---|---|---|---|
| Blade Size | 1″ | 1″ | 1-1/4″ | 1-1/4″ | 1-1/2″ | 1-1/2″ |
| Blade Drive Motor | 1.5 HP | 3 HP | 5 HP | 7.5 HP | 7.5 HP | 7.5 HP |
| Round capacity at 60° | 3.5” | 8.7” | 9” | 10″ | 10″ | 11.8″ |
| Round capacity at 90° | 8.9″ | 13” | 14” | 16″ | 16.5” | 17.7” |
| Round capacity at 45° | 5.7” | 11.5” | 14” | 16” | 16” | 17.7″ |
| Rectangle capacity at 45° | 20 x 26.4″ | 20 x 26″ | 22 x 30″ | 20 x 26″ | 22 x 30″ | 22 x 30″ |
| Capacity at 45° Left | 5.7 x 8.2” | 11 x 11” | 13 x 13.7″ | 16 x 16″ | 16 x 16″ | 17.7 x 20.5″ |
| Rectangle capacity at 60° | 3.5 x 7” | 11 x 7.9” | 12.5 x 9” | 16 x 10″ | 16 x 10″ | 17.7 x 11.8″ |
| Rectangle capacity at 90° | 6 x 9.45” | 11 x 19.7” | 13 x 20” | 16 x 25″ | 15 x 25.6” | 17.7 x 27.5″ |
| Model Number | VT4555 (Marvel 8-Mark II) | VT4555M (Marvel 8-Mark III) | VT3850 (Marvel 380APC) | VT5063 Series (Marvel 2125 & 2150) | VT7995 Series (Marvel 800 APC) |
|---|---|---|---|---|---|
| Capacity at 90° | 18 x 22″ | 18 x 22″ | 15 x 20″ | 20 x 25″ | 31.25 x 37.5″ |
| Capacity at 45° Right | 18 x 12.75″ | 18 x 14.5″ | 15 x 14″ | 20 x 17″ | 31.25 x 25.5″ |
| Capacity at 45° Left | 18 x 12.75″ | 18 x 13″ | 15 x 13.25″ | 20 x 17″ | 31.25 x 24″ |
| Capacity at 60° Right | NA | 18 x 9.7″ | 15 x 9.25″ | 20 x 11.25″ | 31.25 x 17.5″ |
| Capacity at 60° Left | NA | 18 x 7.3″ | 15 x 8″ | 20 x 11.25″ | 31.25 x 15.75″ |
| Blade Drive Motor | 5 HP | 5 HP | 5 HP | 7.5 or 10 HP | 15 HP |
| Blade Size | 1″ | 1-1/4″ | 1-1/4″ | 1-1/4″ or 1-1/5″ | 2″ |
| Automatic or Semi-Automatic | Manual | Semi-Automatic | Automatic | Automatic or Semi-Automatic | Automatic or Semi-Automatic |
| Model Number | V-2026NC | AV-2026NC | CV-2230NC |
|---|---|---|---|
| Automatic or Semi-Automatic | Semi-Automatic | Automatic | Semi-Automatic |
| BBlade Size | 1-1/4″ | 1-1/4″ | 1-1/4″ |
| Blade Drive Motor | 7.5 HP | 7.5 HP | 7.5 HP |
| Capacity at 60° Left | 20 x 12.8″ | 20 x 12.8″ | 20 x 14″ |
| Capacity at 60° Right | 20 x 10.4″ | 20 x 10.4″ | 20 x 12″ |
| Capacity at 45° Right | 20 x 17.1″ | 20 x 17.1″ | 20 x 19.5 |
| Capacity at 45° Left | 20 x 18.3″ | 20 x 18.3″ | 22 x 21″ |
| Capacity at 90° | 20 x 26.4″ | 20 x 26″ | 22 x 30″ |
| Model Number | Round Capacity | Blade Size | Controller | Blade Motor |
|---|---|---|---|---|
| HFA700 | 28″ | 2-5/8″ | Automatic | 15 HP |
| HFA1000 | 40″ | 3″ | Automatic | 15 HP |
| H1300 | 52″ | 3″ | Semi-Automatic | 20 HP |
| H1600 | 63″ | 3″ | Semi-Automatic | 20 HP |
| Model Number | Round Capacity | Blade Size | Controller | Blade Motor |
|---|---|---|---|---|
| HSH-7550S | 20″ | 2″ | Semi-Automatic | 7.5 HP |
| SH-7662 | 24.4″ | 2″ | Semi-Automatic | 10 HP |
| SH-8580D | 31.5″ | 2-5/8″ | Semi-Automatic | 10 HP |
| SH-1010W | 40″ | 2-5/8″ | Semi-Automatic | 15 HP |
| SH-1313 | 51.2″ | 2-5/8″ | Semi-Automatic | 20 HP |
| SH-1817 | 66.9″ | 3″ | Semi-Automatic | 25 HP |
| Model Number | Round Capacity | Blade Size | Controller | Blade Motor |
|---|---|---|---|---|
| DC-500SA | 20″ | 1-1/2″ | Semi-Automatic | 10 HP |
| DC-800SA | 31.5″ | 2-5/8″ | Semi-Automatic | 15 HP |
| DC-1100SA | 43.5″ | 2-5/8″ | Semi-Automatic | 15 HP |
| DC-1700SA | 52″ | 3″ | Semi-Automatic | 20 HP |
| Model Number | Round Capacity |
|---|---|
| VCS-310 | 11.96″ x 8.6″ |
| VCS-600H | 23.5 x 12″ |
| VCS-600 | 18 x 12.75″ |
| VCS-1000 | 36 x 13″ |
| Model Number | Round Capacity |
|---|---|
| 2013 Series | 20 x 13″ |
| 2012 VH | 20 x 12″ |
| 3613 Series | 36 x 13″ |
| 3612 VH | 36 x 12″ |
| Model Number | Round Capacity | Controller | Auto-Loading Conveyor |
|---|---|---|---|
| CMB150CNC | 2.95 – 6.00″ | CNC | Included |
| CMB230 | 3.15 – 9.00″ | CNC | Included |
| CMII-75DG | 390 – 3.00″ | CNC | Included |
| CMII-100DG | 787 – 4.00″ | CNC | Included |
| Model Number | Round Capacity | Controller | Auto-Loading Conveyor |
|---|---|---|---|
| CC-100 | 472 – 4.330″ | CNC | Included |
| CC-150 | 787 – 6.338″ | CNC | Included |
| Model Number | Round Capacity | Controller | Auto-Loading Conveyor |
|---|---|---|---|
| SC-75A | 300 – 3.00″ | CNC | Included |
| SC-100A | 90 – 4.00″ | CNC | Included |
| SC-150A | 2.600 – 6.00″ | CNC | Included |
| Model Number | Capacity | Blade Size |
|---|---|---|
| VM420 | 16.5″ x 5.9″ | 1-1/4″ |
| VM6500 | 255″ x 23.6″ | 2-5/8″ |
| VM3800 | 149″ x 24″ | 2-5/8″ |
| VM2500 | 99″ x 20″ | 2″ |
| VM2500WT | 99″ x 20″ (40″ throat) | 2″ |
| VM1200 | 48″ x 20″ | 2″ |
| Model Number | Capacity | Blade Size |
|---|---|---|
| SVT-6070H | 23.6 x 27.69 | 2″ |
| SVT-30120H | 48″ x 12″ | 1-1/2″ |
| SVC-60260 | 102″ X 24″ | 2″ |
| Model Number | Capacity | Blade Size |
|---|---|---|
| 4824-VPL | 48 x 24″ | 2″ or 2/58″ |
| 4848-VPL | 48 x 48″ | 2″ or 2-5/8″ |
| 4863-VPL | 48 x 63″ | 2″ or 2-5/8″ |
Designed By 911geeks.com